Selling a House With Knob and Tube Wiring in St. Louis
Or call/text 636-525-1566. We answer 24/7.
Knob and tube wiring does not stop a sale in St. Louis, but it does shrink the pool of buyers who can close without asking for something. Insurers, lenders and home inspectors all look closely at it. The steps below put you ahead of those questions instead of answering them in the middle of a contract.
Knob and tube is an early two-wire method: separate conductors run on porcelain knobs and pass through framing in porcelain tubes. It has no ground wire. It still turns up in older homes and two-family flats, often mixed with newer circuits added over the years.
Step 1: Find Out What Is Still Live
Seeing old knobs in the basement or attic does not tell you much on its own. Many houses were partly rewired decades ago and the old runs were simply left in place. Before you price, list or negotiate, have a licensed electrician answer four things in writing:
- Which circuits still run on knob and tube, and what rooms they serve.
- Whether any of it is damaged, spliced into newer wire, or buried in insulation.
- Whether the panel and service size are adequate for the house.
- What a full or partial rewire would cost, and whether it needs a service change.
That one report becomes the document every later step depends on. Without it, a buyer's inspector writes the first description of your wiring, and you negotiate from their version.
Step 2: Call Your Insurer Before a Buyer Does
Your buyer will need a homeowners policy, and a financed buyer cannot close without one. Each insurer applies its own underwriting rules to older electrical systems, so a quick call to your own agent tells you how hard that conversation may be for a buyer.
If you still live there, it also protects you. Under RSMo 375.004, an insurer that refuses to renew must send at least 30 days of advance notice with its actual reason, stated clearly enough that you can tell the basis without asking. The notice must also say you may be eligible for the Missouri basic property insurance inspection and placement program. A nonrenewal in the middle of a sale is a timeline problem, so know where you stand early.
Step 3: Know What a Financed Buyer's Lender Checks
For FHA loans, the current HUD Handbook 4000.1 does not mention knob and tube at all. It sets a general standard instead:
- The appraiser reports a deficiency if the electrical system is not adequate to support the typical functions of the home without disruption.
- The appraiser looks for visible frayed or exposed wiring, including the basement and garage, and reports if amperage or panel size appears inadequate.
- The appraiser operates a sample of switches, fixtures and receptacles inside, in the garage and on exterior walls.
- If a system appears damaged or does not work properly, the appraisal is conditioned on repair or further inspection, and an electrical certification may be required.
An older HUD reference guide, now in HUD's archives, said knob and tube was acceptable in good condition with at least 60 amps. Treat that as history, not today's checklist. Conventional lenders and insurers can add their own conditions, which is why the electrician's report from Step 1 matters so much.
If an inspection already flagged the wiring and the buyer walked, why St. Louis sales fall through at inspection covers your options for the next round.
Step 4: Price Out Your Three Options
| Option | What you spend | Works best when |
|---|---|---|
| Rewire, then list | The electrician, wall patching and paint, up front | The wiring is the main problem and the rest of the house shows well |
| List with a credit | A lower net at closing | A buyer's lender and insurer will accept the house as it stands |
| Sell as-is for cash | The wiring is priced into the offer | You want no contractors, no walls opened and a date you pick |
Rewiring an occupied plaster house usually means opening walls and ceilings in several rooms. If you also have a dated kitchen, an old roof or a basement issue, the math changes fast. Our pages on old and outdated houses and too many repairs walk through that bigger picture.
Step 5: Pull the Right Permit If You Rewire
In the City, electrical permits go to licensed electrical contractors certified by the City, with a narrow homeowner exception. Per the City's electrical permit page, a homeowner permit requires passing a short Electrical Code test, an owner-occupied single-family home, and work limited to a room addition, repair or modification of an existing system. Service changes, rehab and new construction need a licensed contractor. The application fee is $25, and inspection fees are listed on the electrical permit fee schedule.
St. Louis County explains its rules on its residential electrical work page, and many incorporated cities in the County run their own building departments. Call your city hall before work starts. Wiring done without a permit can create a second problem at sale time; see selling with unpermitted work. Not sure which government covers your address? Start with City vs County selling differences.
Put What You Know in Writing
Once an electrician has described live knob and tube, you know about it. How that fits Missouri disclosure depends on your facts and how you sell, so read Missouri seller disclosure rules and do I have to disclose problems when selling as-is?, then ask a Missouri real estate attorney about your situation.
How We Handle Old Wiring
When you sell to House Sold Easy, the wiring stays our problem. We walk the house once, you share the electrician's report if you have one, and we make a written offer that already counts the rewire. No walls opened, no permit, no insurance hunt for a buyer. We close through a title company, typically in about two weeks once title is clear, and we typically cover our standard closing costs.
Older flats are common with this issue, and selling a two-family flat covers the extra steps when tenants live there. We buy across the City of St. Louis and St. Louis County, and you can read how an as-is sale works start to finish.
Have These Ready When You Call
- Any electrician report, inspection report or insurer letter that mentions the wiring.
- Permits or invoices for past electrical work.
- A rough list of other repairs the house needs.
- Your target move-out date.
Call 636-525-1566 or use the form on this page to get your cash offer. David Dodge or Michael Slane will go over the house with you, and we answer 24/7.
This article is general information, not legal, insurance or electrical advice. Codes, permit rules and lender guidelines change; confirm current requirements with your municipality, your insurer and a licensed electrician.
Related Reading
- Can you sell with a bad sewer lateral?
- Selling with City code violations
- Do I need repairs to sell?
- Selling after a failed occupancy inspection
Common Questions
Do I have to replace knob and tube wiring before I sell?
Not to sell to a cash buyer. A financed buyer, their lender or their insurer may ask for repairs or a credit, and some municipalities inspect before a new occupant moves in. Check occupancy rules by municipality first.
Can I rewire the house myself in the City of St. Louis?
Only in limited cases. The City issues homeowner electrical permits for an owner-occupied single-family home after the owner passes a short code test, and only for additions, repairs or changes to an existing system. Service changes and rehab need a licensed contractor.
Will an FHA buyer be turned down because of knob and tube?
Not automatically. HUD Handbook 4000.1 has no knob and tube rule. The appraiser checks whether the system is adequate and safe, reports frayed or exposed wiring, and can require repairs or an electrical certification. The lender and the insurer can still add their own conditions.
Can my insurance company drop me over old wiring?
An insurer can decide not to renew, but Missouri law requires at least 30 days of written notice with the actual reason, and the notice has to mention the state basic property insurance program. Ask your agent before it gets to that point.
Do you buy houses that still have knob and tube wiring?
Yes. We buy as-is, with the old wiring in place, and you do not need an electrician or a permit before closing. Tell us what you know on the first call and we account for it in a written offer.